Shipping and scanning
Shipping in the project warehouse works the same way as in the Golova mobile app. An employee starts shipping, chooses what to do with the scanned SKUs and scans the equipment: the entries move from status to status by themselves. Everything happens in the "Movement" block of the project warehouse (see "Warehouse").
Step 1. Start shipping
Click the round "▶" button on the left of the block panel. The button turns dark, and you see:
checkboxes next to the entries and action icons in the status headers;
the "Action", "Old status" and "New status" fields;
active camera, RFID and manual entry buttons.
From now on the page accepts barcodes from a handheld scanner: just scan. To finish, click "▶" again: barcodes are no longer accepted, and the warehouse is view-only again.
Please note. Employees with "read-only" access to the warehouse and guest users cannot start shipping.

Step 2. Choose the action
In the "Action" field, choose what happens when a SKU is scanned:
"SKU assignment": the SKU is assigned to an entry without a SKU in the "Old status" and stays in this status. This is handy for picking equipment by the specification;
"transfer to another status": the SKU moves from the "Old status" to the "New status". Use it to mark each next step: picked, loaded, received;
"assignment and transfer of the SKU": both actions in one scan: the SKU is assigned to an entry and moves to the "New status" at once;
"adding and transferring SKU": if the project has no such equipment, the SKU is added to the "Shipping" sheet and moves to the "New status". The "Old status" field is hidden in this mode.
When you choose the "Old status", the system fills in the next status in order as the "New status". Choose another one if needed. The selected action and statuses are remembered for you in this project.
Step 3. Scan
Handheld barcode scanner: just scan while shipping is running.
Camera: click the camera button and point the camera of your phone or tablet at the barcode. If the camera is not available, the system shows a message with the reason.
Manual entry: click the keyboard button, type the number in the "Manual SKU entry" window and click "Perform".
RFID: click the RFID button. For a handheld terminal, the RFID scanner settings window opens ("Antenna power", "Volume"); for gate antennas, the "Setting up RFID antennas on the gate" window opens with the power of each antenna and the "Execution mode". In one mode the tags that are read are first collected into a list, which you open with a separate button; in the other ("Process immediately without review") each tag is moved at once. Click "Enable". More about RFID: "RFID".
After each scan the entry goes to the right column, and a message appears at the bottom of the screen: green if everything went well, red if not (for example, the SKU was not found). All reads go to the "Scanner log".
Accessories and consumables
Accessories and consumables are usually stored as a batch under one SKU. So when you scan them, the "Movement" window opens: in the "Confirm the quantity" field, enter how many units go to the new status and click "Confirm". The rest of the quantity stays in the previous status.
If each unit of such an item is scanned separately, turn on "Scan one by one" in the entry card in the catalog, on the "Information" tab. Then the quantity window does not appear: one scan is one unit. More: "Accessories Card", "Consumable Card".
Moving without a scanner
You can also move entries by hand: select them with checkboxes and click the left or right arrow in the status header. More: "Kanban mode".
If the early shipment check is on, the system warns you when you ship equipment needed by earlier projects. More: "Early shipment: overlaps with other projects".
Example chain
Say your warehouse statuses are "in progress", "ready", "sent out" (venue) and "received".
Picking: "Action" — "assignment and transfer of the SKU", "Old status" — "in progress", "New status" — "ready". The storekeeper scans each unit placed in the picking area.
Loading: "transfer to another status", "ready" → "sent out". Scan the equipment as you load it into the vehicle.
Return: "transfer to another status", "sent out" → "received". Scan the equipment that has come back from the venue.
How to set up your own chain of statuses is described in "Warehouse statuses".